Wheels

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Replacement axles for DT Swiss hubs.

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

The SES 2.3 is purpose-built for the mountains. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires, the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Carbon fiber consctruction using continuously running fibers throughout the rim, tapering laminates, and removing excess material - 28mm front and 32mm rear rim depths provide crosswind stability and flatland aerodynamic efficiency to descend confidently and carry speed in the flat valleys between climbs - Hookless bead tubeless technology reduces weight, improves comfort, maintains strength, and ensures an exacting rim bead seat - Premium Road Hubs bring efficiency, longevity, and simplicity: Cold-forged and machined 6061 alloy for durable lightweight performance - Tubeless and disc brake only

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp. - Sold in pairs - Stainless steel: 85 grams/set - Titanium: 78 grams/set

Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

Industry Nine Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools. - From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards in Asheville, NC - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - Classic j-bend spoke interface - Steel cartridge bearings are durable - Easily serviced with no proprietary tools; Designed to keep you in the saddle and out of the service queue

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Replacement freehub bodies for Vault hubs. - Use to replace worn/damaged freehub body or to switch cassette standards. - 60T

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100

- Bladed Competition spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 190g (32/265mm) - Box of 20 - Nipples sold separately