Accessories

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

One of the only bits of maintenance an internally geared hub needs is occasional oiling. Using the proper oil is essential, and, if you have a Shimano Alfine hub, you've found the right stuff. - Mineral oil based lubricant specifically for the Alfine 11-speed hub

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation. - Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system - Features include charging status, speed, riding mode, range, trip distance and total distance

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

PDW Bodega Basket features all-aluminum construction for all-weather durability. Easy-to-use Klickfix bracket securely holds rack to handlebars and allows easy removal for shopping. - Integrated lock holder

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

3/8" drive Zyklop bit sockets. - 9-piece bit-socket set on a robust textile belt, 3/8 - Bit-sockets with all the advantages of the Wera bit technology - Bit-sockets with holding function for screws/bolts - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 3 TORX HF Zyklop bit socket set with holding function, 3/8" drive, 9 pieces - 9x 8767 B HF TORX: TX 10x35.0, TX 15x35.0, TX 20x35.0, TX 25x35.0, TX 27x35.0, TX 30x35.0, TX 40x35.0, TX 45x38.5, TX 50x38.5 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot

- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

The high-quality XPlus cylinder on the Steel-O-Chain 9808K chain lock provides excellent protection against manipulation of the lock and thus against theft. No matter if someone tries to break into the bike lock or the XPlus cylinder with conventional tools, or even special ones – they won’t get very far. The built-in XPlus cylinder and the 8 millimetre specially hardened steel chain provide great theft protection. In order to protect the paintwork on the bike in the long run, the chain is covered with a textile sleeve. Even the keyhole has a cover to protect it from dirt and corrosion. Well secured, your bike can be parked with no worries. - 8 mm square chain. - The chain, housing and structural parts of the locking mechanism are made of specially hardened steel. - Automatic keyhole cover to prevent corrosion and the ingress of dirt. - ABUS XPlus cylinder for the greatest protection against manipulation such as picking. - Great protection for when there is a high risk of theft - Two keys included.

It's fender season Our patented "No-Cut-Strut" bicycle fenders allow quick and simple installation to keep you dry and your bike clean. The premium aluminum construction provides added reliability and less vibration, while the sleek adjustable arms allow ultra-precise placement, so you can tailor the fit faster than you can pull a shot of espresso. Patented No-Cut-Strut alloy fenders provide durability and quick, easy installation. - Fully assembled fenders that install in minutes with only two tools - Durable no-cut alloy struts allow quick adjustment for proper tire clearance - Made of premium aluminum for added durability and reduced flexing and vibration - Double-back strut on rear fender adds support and stability - Stainless steel hardware

Edge Power Mount - Computers Parts and Accessories

Whether you’re training indoors or out, the HRM-Pro Plus heart rate strap provides the accurate data you need to push limits and reach goals. - HRM-Pro Plus transmits real-time heart rate data to compatible devices, equipment and apps. - The tool-free door makes changing your battery easy, plus get up to 1 year of battery life. - Connect to your compatible Garmin smartwatch, and get pace and distance data for your indoor runs. - No, it’s not just a heart rate monitor. Running dynamics also help you improve your form (requires compatible Garmin smartwatch). - Not wearing your watch? HRM-Pro Plus captures steps, calories burned, intensity minutes and more.

With its flat design, the cable-free EOX® VIEW 1300 fits discreetly into the overall image of the e-bike and ensures a clean looking cockpit. It’s equipped with a long-life battery, which allows it to be rotated out of the mount like a regular bike computer. The high-performance ANT+ and Bluetooth interface ensures a secure data connection. The three buttons at the bottom make the e-bike computer easy to use. The transflective FSTN display ensures ideal readability even in direct sunlight. An integrated sensor automatically adjusts display brightness relative to the ambient light. The EOX® VIEW 1300 can communicate with the EOX® app via BLE. - Ebike functions include: Assist Mode, range, speed, battery charge level, power produced, power comparison (power produced and motor power), cadence, light status (full/dimmed beam), gear indicator and change recommendation - Heart rate (with the BLE chest strap) and training indicator - Calories burnt - Segmented FSTN display - Navigation with komoot turn-by-turn instructions - E-system and smart phone connection, time, and date - Backlight - Remote control with EOX® Remote 500 (sold separately)