Filter By:
- Bar Ends (9)
- BMX (37)
- Bottom Brackets (162)
- Brakes/Levers/Pads (464)
- Cables (125)
- Cassettes/Freewheels (112)
- Chainrings (198)
- Chains (96)
- Show More Categories
- Cranksets (211)
- Derailleurs (148)
- Forks (145)
- Groups (18)
- Handlebar Grips/Tape (214)
- Handlebars (169)
- Headsets (136)
- Pedals (196)
- Saddles (176)
- Seatposts (72)
- Shift/Brake Combinations (66)
- Shifters (113)
- Shocks (23)
- Stems (101)
- Other (1357)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Once you find the part you need, order it for shop pick up and call the service department to set up installation. |
$0.10
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.00
FSA Mega Exo Small Parts.
$2.00
Race Face Crank Arm Fixing Bolts
- For EXI Cranks
- Bolt Puller Cap Washer for self-extracting bolt
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
- Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.00
Trek proprietary frame hardware.
- Trek MTB Cable Stops and Guides
- For specific compatibility concerns, please contact our Customer Service team
$2.15
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.50
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$2.75
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.80
Replacement piston and seals for Hope disc brake calipers.
$2.80
Replacement piston and seals for Hope disc brake calipers.
Page 1 of 143
Next page