Parts

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.

Road riders are going beyond where we’ve ever gone before. We’re going further and faster. And when the road stops, we keep going. One thing hasn’t changed: We want to push those boundaries without any distractions. So we made eTap AXS for today’s riders. The result: an intuitive, high-performance groupset that means you can focus on what’s most important—your ride. Exploring new limits has never been easier. SRAM RED eTap AXS—Simply Beyond. Upgrade kit includes: - 650mm Blips x2 - 650mm Clics x2 - Blip Box - Rear Derailleur and battery - Charger and cord - Quick Start Guide

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

The versatility of the Cane Creek HELM continues with the new HELM DJ. The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding. Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

XC spec and ready for the trail. XX1 Eagle AXS utilizes the proven backbone of SRAM 1X. With the lightest weight materials and a 520-percent gear range. More secure and longer wearing X-SYNC 2 chainring. The pinnacle of performance, paired with the connected components of Eagle AXS. Ready for the new gen of super bikes. - XC focus - Carbon cage - Ti hardware Includes: - Rear Derailleur with Battery and Battery Protector - Rocker Paddle Controller with Clamp - Charger/Cord - Chain Gap Tool

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter

E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount